1. Connect your portable device with one end of the included USB
cable, and insert the other end to the output port of the jump starter.
2. Press the power switch to turn on the jump starter and start charging.
Charging will begin as soon as the jump starter turns on.
3. Once the charging is completed, disconnect your portable device
and unplug the USB cable from the jump starter.
Compatible with: smart phones, tablets, digital cameras, mobile
gaming devices, wireless earphones and more
Charging Portable Devices
Note: Charging time will vary depending on the portable device and
the device's battery capacity.
To Next Page
Loading...
Need help?
General
