Shengmilo MX01 - Display Screen Information

22
◆ Display Screen
Location
Information on Display
1
Power Level
2
Speed Display Area: Maximum speed MAX, average speed
AVG
Unit MPH, KM/H
The meter will calculate the true speed based on the wheel diameter
and signal data.
3
Vehicle Mode:
Walk boost mode; Cruise: constant speed cruise
mode; PAS: Power file position: 0 ~ 5.
4
Headlight:The instrument can be manually turned on and the
brightness of the sensing environment is automatically turned on(light
sensitivity support.
is required)
5
Multifunctional Display Area: Total mileage (ODO); Single
mileage (TRIP A); Single mileage (TRIP B); Battery current voltage
(VOL); Current operating current (CUR); Remaining mileage (RM);
Instrument boot time (TM)
Display error codes(E006, E007, E008, E009, E010)