Need help?Do you have a question about the Sherwood AX-50 and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Dimensions | 440 x 138 x 330mm |
| Weight | 7.7kg |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Signal to noise ratio | 85dB (MM), 95dB (line) |
| Power Output | 50 watts per channel into 8Ω (stereo) |
| Total Harmonic Distortion (THD) | 0.08% |
| Input Impedance | 47k ohms |
| Speaker load impedance | 8Ω to 16Ω |
Warnings to prevent electric shock, including not removing covers and using polarized plugs correctly.
Instructions regarding exposure to rain, moisture, and proper servicing by qualified personnel.
Covers reading instructions, retaining them, heeding warnings, cleaning, and proper grounding/polarization.
Details on overloading, power sources, accessories, and cord protection to prevent hazards.
Conditions requiring service, including unusual operation, spills, or damage.
Guidelines for handling, ventilation, and avoiding liquids, foreign objects, and unauthorized modifications.
Advice on avoiding direct sunlight, high temperatures, and improper cleaning agents.
Identifies and describes the functions of each button on the remote control unit.
Instructions for installing batteries and notes on remote control operation range and potential interference.
Guidelines for battery use, including polarity, types, handling, and replacement when exhausted.
Details the function and purpose of each control on the front panel of the amplifier.
Describes all input and output terminals, power switch, and AC outlet on the rear panel.
Explains audio connection color coding and describes optical, coaxial, and analog RCA cables.
Guides on connecting speakers, including impedance checks, terminal identification, and cable preparation.
Details analog audio inputs and specific instructions for connecting turntables with ground wire.
Explains the use of optical and coaxial digital audio inputs, including optical jack care.
Instructions for turning the unit on/standby and connecting/using headphones.
Details on analogue audio output jacks and the subwoofer pre-out connection.
Guides on selecting input sources and adjusting the volume level for playback.
Explains bass, treble, tone direct settings, and the process for Bluetooth pairing and wireless music playback.
Addresses common amplifier problems like speaker reversal, hum, sound cut-off, and low bass response with solutions.
Provides solutions for issues where the remote control is not working, including battery and range problems.
Lists detailed technical specifications for the amplifier's audio performance and Bluetooth features.
Provides general specifications including power, dimensions, and weight of the main unit.
Outlines the terms, conditions, scope, and exclusions of the product's limited warranty.
Provides guidance on how to obtain warranty service, contact support, and pack the product for shipping.
To Next Page
