Why does my Sherwood CD Player have poor or distorted sound?
Poor or distorted sound from your Sherwood CD Player can occur if the unit is connected to the PHONO input jacks of the amplifier/receiver; ensure correct connections. Also, check all connections to make sure all cords are securely connected.
How to stop my Sherwood CD Player from skipping?
If your Sherwood CD Player is skipping, it could be due to a defective or deeply scratched disc; try playing another disc. Also, ensure the unit is placed on a stable surface, free from vibration or physical shock.
What to do if programming is not performed on Sherwood CD Player?
Typical Audio Performances| number of channels | 2 |
|---|---|
| frequency response | 20~20, 000 Hz ±0.8 dB |
| signal to noise ratio | 94 dB |
| dynamic range | 86 dB |
| total harmonic distortion | 0.009 % |
| audio output level | 2 V RMS |
| digital output wavelength | 660 nm -20 ~ -15 dBm |
Optical Readout System| laser type | Semiconductor laser |
|---|---|
| wavelength | 760~800 nm |
| numerical aperture | 0.45 |
Signal Format| sampling frequency | 44.1 kHz |
|---|---|
| D/A conversion | Multibit (Sigma-delta conversion) |
| oversampling | 8 times |
General| power supply | 230 V ~ 50 Hz |
|---|---|
| power consumption | 23 W |
| dimensions | 440x112x397 mm (17-5/16x4-7/16x15-4/6 inches) |
| weight | 5.6 kg (12.4 lbs) |
Safety and initial operating instructions for safe use.
Crucial safety information and precautions for user protection.
Steps to connect analog audio outputs to an amplifier or receiver.
Instructions for inserting batteries into the remote control.
Step-by-step guide to playing music tracks or files from discs or USB.
How to choose a specific disc for playback from the changer.
Methods for skipping tracks or files during active playback.
Options for repeating tracks, folders, or entire discs/files.
To Next Page
