Shibaura SG280E - Page 12

11
1111
11
GENERAL INFORMATION
PLEASE READ CAREFULLY:
For a complete list of the pre-delivery service
checks performed by your dealer, refer to the
PRE-DELIVERY SERVICE checklist found at the
back of this manual. Keep one copy as your
record
of the service performed. The other copy
should be
removed from the manual and kept
by your dealer.
MAKE SURE THAT BOTH
COPIES ARE
COMPLETED AND THAT YOU
AND THE
DEALER SIGN BOTH COPIES.
A PRODUCT IDENTIFICATION PLATE is located
in the front frame of the mower.
The numbers on the plate are important in the
event your mower should require future service.
For your convenience, have your dealer record
these numbers in the appropriate spaces below.
IHI Shibaura Machinery Corporation is
continually
striving to improve its products. We
reserve the
right to change prices, specification,
or equipment
at any time without notice.
All data given in this book is subject to
production
variations. Dimensions and weights
are
approximate only, and the illustrations do
not
necessarily depict Mower in standard
condition.
For exact information about any
particular Mower,
please consult your SHIBAURA dealer.
This Mower has been designed for doing light
work,
such as mowing, blowing snow. Do not
attempt to
use implements that were not
designed for this
mower, as they may cause damage to the mower.
Fig.1-1