Shibaura SG280E - CHECK BEFORE OPERATION; Operator Readiness and Safety Precautions

23
2323
23
SECTION 5-CHECK BEFORE OPERATION
4
44
4
●
Always stop the engine and apply the
parking brake before starting
inspections,
services or adjustment.
● While the engine
is running or hot, never
top up the oil as you may be burnt.
● Do not hold a cigarette in
your mouth or
use a naked flame
when supplying fuel.
After refueling
, tighten the fuel cap firmly
and wipe
away spilled fuel. Ignoring this
caution may lead to a fire.
●
If the fuel pipe is damaged, fuel may leak.
Be sure to check damages of the fuel pipe.
If not, a fire may be caused.
●
To secure safe and comfortable working
conditions, the operator of t
his machine
should perform the start-
up inspection
every day. Defects should be immediately
repaired. Check also after shut down to find
any abnormalities.
●
Carry out inspections and maintenance
services in a flat and stable place where
there is no traffic danger or the mach
ine
may not fall over or move when using a
jack.
If these precautions are not
observed, the machine may fall over or
other accident may happen.
● If you should perform start-
up inspections
and services with the engine running, avoid
a closed space.
● During the start-
up inspections, keep any
persons (particularly children) away from
the workplace.
Danger
●
Carry out inspections and services after the
heated muffler, engine and other parts have
completely cooled down
. If not, you may be
burnt.
●
When removing covers or other components
for inspections or services, always reinstall
them. If not, you may touch a running part of
the machine and you will be injured.
1. Physical Condition and Clothes of Worker
①
①①
① Physical condition
When doing inspections or services, you should
be in good health. If you cannot concentrate your
attention on your work due to fatigue, sickness
,
drug influence or other, you should not work on
the machine. In particular any
person who is
under t
he influence of alcohol, pregnant or under
18 years old should not work on, or with
the
machine.
②
②②
② Clothes
●
You should avoid so loose clothes that you
may be caught by the operation
levers or
machine parts.
● You should wear protective shoes with
slip-resistant shoes.
● Wear a helmet.
●
Wear protective glasses, mask, gloves, and
other protective apparatus as required.
Caution
Warning