Shibaura CM284 User Manual

219 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

FRONT MOWER

CM284

CM364

WORKSHOP MANUAL

Table of Contents

Other manuals for Shibaura CM284

Brochure & Specs6 pages

Questions and Answers:

Z
zbrooksAug 1, 2025
What to do if my Shibaura Lawn Mower engine starts but will not stop at once?
- C
  conniecookAug 1, 2025
  If your Shibaura Lawn Mower engine starts but doesn't stop immediately, several issues could be the cause. The filter or pipes might be clogged, requiring replacement or cleaning. Alternatively, air could be mixed in, necessitating a check of the fuel pipe and connections. A clogged fuel tank filter cap air breather could also be the culprit, requiring a wash. Finally, inspect the electric system of the engine stop solenoid for a short-circuit or disconnected wire and repair if needed.
T
Teresa CampbellAug 11, 2025
Why Shibaura CM284 Lawn Mower engine does not start?
- T
  thomas43Aug 11, 2025
  The Shibaura Lawn Mower engine might fail to start due to a fuel shortage or air mixed in. Replenish the fuel, inspect the air entering the part, and bleed any air. Another potential cause is a defective engine stop solenoid. In this case, check and replace the electric system.
K
kiarajohnsonAug 22, 2025
How to fix unstable engine output on Shibaura CM284 Lawn Mower?
- I
  Ian ShafferAug 22, 2025
  If your Shibaura Lawn Mower's engine output is unstable, it could be due to air or water mixed in the fuel. Check the fuel pipe and connections to resolve air mixture issues. If water is present in the fuel, replace the fuel and the filter.

Shibaura CM284 Specifications

General

Engine	Shibaura
Fuel Type	Diesel
Cylinders	3
Rated RPM	2600
Transmission Type	Hydrostatic
Number of speeds	2
Drive	4WD

Summary

Chapter 1. GENERAL

1-1 Specifications & Performances

Detailed technical data and performance metrics for CM284 and CM364 models.

Chapter 2. ENGINE

2-1 Engine Removal

2-2 Disassembly, Inspection and Reassembly

Detailed procedures for dismantling, inspecting, and reassembling engine components.

2-4 Trouble Shooting

Common engine problems, their causes, and recommended solutions for diagnosis and repair.

2-5 Engine Maintenance Standard Table

Reference table for standard dimensions, clearances, and tolerances for engine parts.

Chapter 3. TRANSMISSION AND BRAKE

2. Transmission Unit

Chapter 4. HST SYSTEM

2. HST Unit Removal

4. Disassembly and Reassembly

Procedures for dismantling, inspecting, and reassembling HST system components.

8. Adjustment

9. Trouble Shooting and Specifications

Guidance for diagnosing and resolving HST system issues, along with technical specifications.

HST Transmission Specifications

Key specifications and bolt torques for the HST transmission.

Chapter 5. POWER STEERING

2. Control Valve Assembly

5. Trouble Shooting

Guidance for diagnosing and resolving common power steering system issues.

Chapter 6. REAR AXLE ASSEMBLY

4. Disassembly

Chapter 9. MAINTENANCE STANDARDS TABLE

Maintenance Standards Table

Comprehensive table of maintenance standards, clearances, and torques for tractor components.

Chapter 10. ELECTRICAL SYSTEM

3. Function Inspection and Adjustment

Procedures for inspecting and adjusting various electrical system components.

Related product manuals

Preview: Shibaura GT161

Preview: Shibaura SX21

Preview: Shibaura SR525

Preview: Shibaura ST318