CHECK BEFORE OPERATION
2. Inspection Method
Users of this machine should perform start-up inspection before starting operation every day to ensure
safe and comfortable operation, according to the procedure below. Correct extraordinary conditions,
if any, immediately. If any problems are felt during operation, inspect and repair without delay.
① Go around the machine to see:
● Air pressure, wear and damage of tires····························································
● Looseness of bolts fixing the wheels ································································
● Fuel level, fuel leakage, damage of fuel pipe ···················································
● Level in the oil tank, contamination or leakage of oil·········································
● Battery electrolyte level ····················································································
● Deformation, damage or stain of each part
● Damage of various parts of vehicle body, looseness of bolts
Reference page
47
47
38
39
43
② Open the bonnet to see:
● Level and contamination of engine oil, fuel leakage ·········································
● Level of cooling water, water leakage, damage of hose ···································
● Condition of the air cleaner ··············································································
● Insufficient tension or damage of cooling fan belt·············································
● Dust or grass on the radiator grill or in the engine area ····································
● Condition of wiring loom and sheathing, loose connections······························
Reference page
38, 40
42
43
45
46
③ Sit on the driver’s seat and check:
● Brake operating condition ················································································
● Traveling pedal operating condition··································································
● Allowance of steering wheel·············································································
Reference page
47
21
31
④ Start the engine and check:
● Colour of exhaust gas ······················································································
● Operation of lamps and meters ········································································
● Noise or vibration after the engine is started
Reference page
47
18, 19
To Next Page
Loading...
