Shibaura SG280E - Page 33

32
3232
32
DRIVING AND WORK
9. Towing when self-
propelled running is
impossible
● If the vehicle becomes unable to
be
driven because of failure of the hydraulic
system or for other reason,
it is possible
to move the vehicle
by opening the
hydraulic circuit so that the wheels can
rotate and allow the vehicle to move.
●
Loosen the unload valve to open the
hydraulic circuit and allow the wheels
to
rotate freely. Loosen the 2 unload valves.
●
Set up the vehicle as described below for
the traction.
(1) Stop the engine.
(2)
Change the shift lever to the “High
Speed” position (2-wheel drive vehicle).
(3) Loosen the unload valve under the
seat.
Do not turn the valve more than one
rotation.
● Do not turn the unload valve to lo
osen it more
than one full rotation.
●
Stop the engine when the vehicle is towed.
To start the engine again, tighten the unload
valve.
Caution