SECTION 4 – SXM54, SXM60 MOWER DECK
4-5
SAFETY DECALS
CARE OF SAFETY DECALS
1. Keep safety decals clean and free of dirt and
debris.
2. Clean safety decals with mild soap and water
and dry with a soft cloth.
3. Replace any damaged, missing or illegible
safety decals with new decals obtained from
your SHIBAURA Dealer.
4. If a component with safety decals affixed is
to be replaced, make sure new safety decals
are attached in the same locations on the
replaced component.
5. Install new safety decals by applying on a
clean dry surface, working air bubbles out to
the edges.
DECAL LOCATIONS
To Next Page
Loading...
