Need help?Do you have a question about the Shimadzu UX8200S and is the answer not in the manual?
General| Capacity | 8200 g |
|---|---|
| Pan Size | 190 x 190 mm |
| Operating Temperature | 5°C to 40°C |
| Calibration | External Calibration |
| Interface | RS-232C |
| Power Supply | AC adapter (included) |
Classifies danger levels and explains warning symbols used in the manual.
Details critical safety warnings like not disassembling, using correct power, and avoiding water.
Advises on avoiding locations with airflow, vibration, sunlight, extreme temps, etc.
Covers careful handling, avoiding unauthorized connections, and immediate action for abnormalities.
Identifies main parts like pan, body, display, and keys for different models.
Explains the function of each key during weighing and menu selection.
Details the meaning of various symbols and indicators on the balance display.
Guides on selecting a suitable location considering power and environmental factors.
Instructs on checking contents and condition after unpacking the balance.
Details the physical installation steps, including handling transportation screws and leveling.
Step-by-step guide to power on the balance and its self-check sequence.
Instructions on performing span calibration for accurate measurements.
Step-by-step guide on how to perform a basic weighing operation.
Overview of direct data transfer to computers without software installation.
Guides on configuring the balance and computer for WindowsDirect connection.
Instructions on how to verify the WindowsDirect data transfer is working correctly.
Provides solutions for common issues encountered with the WindowsDirect function.
Step-by-step guide on how to select and set menu items using the balance keys.
Details the process for inputting numerical values for menu settings.
Explains the importance and conditions for performing balance calibration.
Details how to perform calibration, including using built-in or external weights.
Explains common messages displayed on the balance and their meanings.
Lists error codes, their descriptions, and countermeasures.
Provides solutions for common operational problems and symptoms.
To Next Page
