Need help?Do you have a question about the Shimadzu UX6200H and is the answer not in the manual?
General| Maximum Capacity | 6200g |
|---|---|
| Readability | 0.01 g |
| Display | LCD with backlight |
| Power Supply | AC Adapter |
| Repeatability (Standard Deviation) | 0.01 g |
| Linearity | ±0.02 g |
| Stabilization Time | Approx. 1.5 seconds |
| Operating Temperature Range | 5°C to 40°C |
| Interface | RS-232C |
| Auto Power Off | Yes |
| Units of Measurement | g, oz |
| Application Modes | Animal Weighing, Check Weighing, Counting |
| Weighing Units | g, oz |
Explains the function of each key on the balance panel during operation and menu selection.
Guides on selecting an appropriate site, avoiding environmental factors that affect performance.
Covers physical installation, power on, and initial calibration steps.
Details the procedure for connecting the power adapter and turning on the balance.
Explains how to perform span calibration to ensure accurate measurements.
Step-by-step guide on how to perform a basic weighing operation with the balance.
Comprehensive guide for setting up WindowsDirect, including cable and computer configuration.
Solutions for common problems encountered when using the WindowsDirect feature.
Explains why and when calibration is required for accurate weighing.
Details the procedures for performing span calibration and checks.
Covers settings for calibration types and automatic calibration features.
Guide to selecting and setting up various weighing units for display.
Features for pass/fail judgment based on sample weight.
How to use the Piece Counting function to count items by weight.
Lists error codes, their descriptions, and recommended countermeasures.
To Next Page
