Need help?Do you have a question about the Shimadzu UW220H and is the answer not in the manual?
Explains the FDA regulation for electronic records and signatures.
Details the function of each key during operation.
Guidance on selecting a suitable location for balance installation.
Detailed instructions for setting up the balance physically.
Steps for performing span calibration.
Step-by-step guide for performing basic weighing.
Configuration steps for balance and computer.
How to initiate and verify WindowsDirect functionality.
How to navigate and select menu items.
Explains the importance and conditions for calibration.
Procedures for executing calibration.
Calibrating UW series using internal weight.
Checking calibration with internal weight.
Calibrating using external weights.
Checking calibration with external weights.
Options for configuring calibration types.
Auto calibration based on temperature changes.
Scheduled automatic calibration.
Password-protected calibration of built-in weight.
Setting password for PCAL function.
Adjusting stability and response modes.
Using balance for checkweighing and target value monitoring.
Pass/fail determination based on sample weight.
Classification using bar graph and checkweighing.
Weighing based on a target value and limits.
Configuring communication parameters.
Lists error codes and their countermeasures.
General troubleshooting guide for common issues.
Details the steps for performing span calibration.
To Next Page
General
