Need help?Do you have a question about the Shimadzu UW420H and is the answer not in the manual?
General| Maximum Capacity | 420 g |
|---|---|
| Readability | 0.001 g |
| Display | LCD |
| Linearity | ±0.002 g |
| Response Time | Approx. 3 seconds |
| Interface | RS-232C |
| Repeatability | 0.001 g |
| Weighing Units | g, oz, ct |
| Power Supply | AC adapter |
| Calibration | External |
Details the function of each key during weighing and menu selection.
Step-by-step physical installation procedures for the balance.
Detailed steps for performing span calibration to ensure accuracy.
Step-by-step guide for basic weighing operations.
Steps to set up the balance and computer for WindowsDirect communication.
Solutions for common problems encountered with WindowsDirect.
Process for entering numerical data for various settings.
Detailed steps for performing span calibration using built-in or external weights.
Steps for performing calibration checks using built-in or external weights.
Configuration options for calibration, including automatic and password-protected methods.
How to use the balance for counting individual pieces.
Guide to connecting the balance to a PC via RS-232C.
Detailed settings for balance communication parameters like handshaking and baud rate.
Explains various status and informational messages displayed by the balance.
Lists and explains error codes and their corresponding countermeasures.
Provides solutions for common operational problems not covered by error codes.
To Next Page
