Need help?Do you have a question about the Shimano ALFINE SG-S7001-8 and is the answer not in the manual?
General| Series | Alfine |
|---|---|
| Number of Gears | 8 |
| Gear Ratio Range | 307% |
| Brake Type | Disc brake |
| Over Locknut Distance | 135 mm |
| Hub Spacing | 135 mm |
| Type | Internal Gear Hub |
| Recommended Chain | CN-HG53, CN-HG93 |
| Brake Compatibility | Center Lock |
| Recommended Use | Touring, Commuting |
Provides crucial initial safety notices, general warnings, and hazard classifications (DANGER, WARNING, CAUTION).
Details safety measures for disc, coaster, and roller brakes, covering operation, maintenance, and potential hazards.
Addresses internal hub phenomena, sprocket recommendations, chain safety, and lubrication guidelines.
Lists specific tools needed for installation, removal, adjustment, and maintenance procedures.
Guides for installing sprockets (with/without chain guard) and the cassette joint onto the hub.
Instructions for installing disc brake rotors and INTER M brakes to the hub body.
Covers mounting the hub to the frame and routing and installing the shifting cable.
Step-by-step guide to adjusting the cassette joint using setting lines for proper gear shifting.
Procedure for safely disconnecting the shifting cable when removing the rear wheel from the frame.
Comprehensive instructions for oil maintenance of internal hubs, including oil replacement and cleaning.
To Next Page
