To Next PageTo Next Page
Need help?Do you have a question about the Shimano STEPS E6000 and is the answer not in the manual?
General| Motor Type | Brushless DC motor |
|---|---|
| Motor Power | 250W |
| Torque | 50Nm |
| Battery Voltage | 36V |
| Assist Modes | Eco, Normal, High |
| Walk Assist | Yes |
| Average Weight | 3.2kg (Motor Unit) |
| Maximum Assist Speed | 25 km/h |
| Chain Case Compatible | Yes |
| Internal Gear Hub Compatible | Yes |
| Series | STEPS E6000 |
| Type | Mid-drive |
| Compatible Wheel Size | 26-28 inches |
| Charging Time | 3.5-4 hours (depending on battery model) |
Explains the meaning of DANGER, WARNING, CAUTION, and IMPORTANT safety symbols.
Information on pedelec weight and its impact on safety.
Details permitted overall weight and its components.
Essential safety instructions for operating the pedelec.
Measures to protect the pedelec from theft and how to recover it.
Preparations and checks before riding the pedelec for the first time.
Instructions for adjusting the saddle height for optimal comfort and safety.
Method to determine the proper saddle height for the rider.
Information on using the brakes effectively and safely.
Pre-ride checklist and safety inspections for the pedelec.
Safety guidelines for transporting the pedelec.
Critical safety warnings and precautions for battery handling.
Technical specifications for different battery models.
Components and basic operations of the battery.
Explanation of the battery display panel and LEDs.
Step-by-step guide to installing and locking the battery.
Procedure for safely unlocking and removing the battery.
Factors influencing the pedelec's travel range on a single charge.
Critical safety warnings and precautions for charger usage.
Overview of the battery charger's functions.
Step-by-step instructions for charging the battery.
Diagnosing and resolving common battery faults.
Diagnosing and resolving common charger faults.
Table of specified torque values for tightening screws and bolts.
