EasyManua.ls Logo

Shimano GRX RD-RX812 User Manual

Shimano GRX RD-RX812
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
(English)
Dealer's Manual
ROAD MTB Trekking
City Touring/
Comfort Bike
URBAN SPORT E-BIKE
Rear Derailleur
GRX
RD-RX810
RD-RX812
RD-RX400
DM-GARD001-02
Question and Answer IconNeed help?

Do you have a question about the Shimano GRX RD-RX812 and is the answer not in the manual?

Shimano GRX RD-RX812 Specifications

General IconGeneral
CategoryBicycle
SeriesGRX
ModelRD-RX812
Maximum Sprocket42T
Minimum Sprocket11T
Total Capacity31T
ClutchYes
Min Low Sprocket11T
Rear Speeds11
Cage LengthLong
Compatible ChainHG 11-speed
Mount TypeDirect attachment
CompatibilityShimano 11-speed
Actuation RatioShimano Road

Summary

Important Notices and Safety Guidelines

General Safety Precautions

Key safety instructions, warnings, and user advisories for product operation.

Installation and Maintenance Best Practices

Guidelines for proper installation, lubrication, and maintenance procedures.

Tools Required for Service

Rear Derailleur Installation and Removal

Standard Type Installation

Step-by-step guide for installing the standard type rear derailleur.

Direct Mount Type Installation

Step-by-step guide for installing the direct mount type rear derailleur.

Rear Derailleur Adjustment Procedures

High Limit Stroke Adjustment

How to adjust the high limit screw for proper shifting to the smallest cog.

Chain Length Check and Setup

Procedure for checking and setting the correct chain length.

Inner Cable Connection and Securing

Steps for properly connecting and securing the inner shift cable.

Low Limit Stroke Adjustment

How to adjust the low limit screw for proper shifting to the largest cog.

B-Screw Adjustment

Procedure for adjusting the B-screw to set pulley-to-sprocket clearance.

SIS Adjustment

Steps for fine-tuning the shifting system (SIS) for smooth gear changes.

Rear Derailleur Maintenance Procedures

Pulley Replacement

Instructions for replacing the guide and tension pulleys.

Chain Stabilizer Lubrication

Guidance on applying grease to the chain stabilizer for smooth operation.

Friction Adjustment

How to adjust the friction level of the derailleur's clutch mechanism.

Plate and Plate Tension Spring Replacement

Procedures for removing and installing the plate and its tension spring.

Related product manuals