Need help?Do you have a question about the Shimano NEXUS SG-C7002-5 and is the answer not in the manual?
General| Series | NEXUS |
|---|---|
| Model | SG-C7002-5 |
| Type | Internal Geared Hub |
| Number of Gears | 5 |
| Gear Change Support Mechanism | Yes |
| Spoke Holes | 32/36H |
Key safety warnings, cautions, and general precautions for product installation and use.
Specific safety advice for operating and maintaining bicycle braking systems.
Safety measures for handling specific components like disc rotors and hubs.
Safety guidelines for gear shifting operations and different brake types.
Notices regarding normal product phenomena and recommendations for maintenance.
Safety information for maintenance of specific product models and types.
Procedure for installing sprockets, with and without chain guards, including component orientation.
Steps for installing the cassette joint to the hub body, including alignment and securing.
Guide for installing disc brake rotors, covering different types and safety measures.
Instructions for installing the INTER M brake to the hub body, including spline engagement.
Detailed steps for mounting the hub onto the bicycle frame, including washer selection and securing.
Procedure for installing the shifting cable, from shift lever to cassette joint, including routing and securing.
Steps for adjusting the cassette joint by aligning setting lines on the bracket and pulley.
Procedure for disconnecting the shifting cable before removing the rear wheel from the frame.
Detailed steps for oil maintenance of internal hubs, including preparation, execution, and reassembly.
To Next Page
