Need help?Do you have a question about the Shimano GRX RD-RX400 and is the answer not in the manual?
General| Series | GRX 10-speed |
|---|---|
| Model | RD-RX400 |
| Speed | 10-speed |
| Max Sprocket | 36T |
| Min Sprocket | 11T |
| Total Capacity | 41T |
| Clutch | Yes |
| Maximum Front Difference | 16T |
| Compatible Chain | HG-X 10-speed |
| Pulley Teeth | 11T |
| Weight | 303g |
Procedure for installing the rear derailleur onto the bicycle frame.
Steps for installing the rear derailleur using the standard mounting method.
Steps for installing the rear derailleur using the direct mount method.
Procedure to set the upper limit of the rear derailleur's gear shifting.
Guidance on how to correctly install the bicycle chain.
Method for determining the correct length of the bicycle chain.
Instructions for connecting and securing the shift inner cable.
Procedure to set the lower limit of the rear derailleur's gear shifting.
How to adjust the B-tension screw for proper derailleur positioning.
Steps for performing Shimano Index System (SIS) gear adjustment.
Guide for replacing the guide and tension pulleys on the rear derailleur.
Instructions for lubricating the chain stabilizer assembly.
Procedure for adjusting the friction level of the rear derailleur.
Steps for removing the rear derailleur plate and tension spring.
Steps for installing the rear derailleur plate and tension spring.
To Next Page
