Need help?Do you have a question about the Shimano GRX RD-RX810 and is the answer not in the manual?
General| Series | GRX |
|---|---|
| Model | RD-RX810 |
| Max Front Difference | 17T |
| Total Capacity | 40T |
| Low Sprocket Max | 34T |
| Low Sprocket Min | 30T |
| Top Sprocket Max | 11T |
| Top Sprocket Min | 11T |
| Compatible Chain | HG-EV 11-speed/HG-X11 |
| Rear Speeds | 11 |
| Average weight | 251 g |
| Cage Length | Medium |
| Weight | 251 g |
| Material | Aluminum/Steel |
| Pulley Teeth | 11 teeth |
| Mount Type | Direct Mount |
| Compatibility | Shimano 11-speed |
Procedure for installing the rear derailleur, covering standard and direct mount types.
Adjusting the rear derailleur's high limit screw for proper shifting to the smallest cog.
Steps to measure and confirm the correct length of the bicycle chain.
Routing and securing the shift cable's inner wire to the rear derailleur.
Adjusting the rear derailleur's low limit screw for proper shifting to the largest cog.
Adjusting the B-screw to set the derailleur pulley gap with the largest sprocket.
Fine-tuning the indexed shifting system for smooth gear changes.
Instructions for replacing the guide and tension pulleys on the rear derailleur.
Procedure for lubricating the chain stabilizer assembly to ensure smooth operation.
How to adjust the friction level of the clutch mechanism for optimal performance.
Steps for removing and installing the derailleur's plate and tension spring.
To Next Page
