16
To be continued on next page
INSTALLATION
Installing the crank arms
Installing the crank arms
1
Fully insert the right crank arm unit
until it touches the bottom bracket.
2
(C)
(B)
(A)
Set the wide groove area of the left
crank arm into the axle of the right
crank arm unit where the groove is wide.
(A)
Wide groove area (left crank arm)
(B)
Wide groove area (axle)
(C)
Apply grease
Premium Grease (Y04110000)
3
(A)
(B)
(C)
Use the SHIMANO original tool to
tighten the cap.
(A)
TL-FC16
(B)
Cap
(C)
Apply grease
Premium Grease (Y04110000)
Tightening torque
0.7 - 1.5 N·m
To Next Page
Loading...
