Shimano Steps BT-E6000 - Setting Menu: Language; Setting Display Language

42
 Beep
Turn the beep sound ON/OFF.
Even when [Beep] is set to [OFF], a beep will sound when there is a misoperation, system error, etc.
1. Enter the [Beep] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Beep], then
press Assist-A.
2. Press Assist-X or Assist-Y to move the cursor to the
item you want to configure.
Assist
Configurable
items
Details
[ON] Enable beeps
[OFF] Disable beeps
3. Press Assist-A to confirm the setting.
* The screen will automatically return to the setting
menu screen.
Assist