Shimano Steps BT-E6000 - Setting Menu: RD Protection Reset; Executing RD Protection Reset

46
 Shift timing
Adjust the shift timing of the automatic shift mode.
This setting is used when shifting advice is displayed during manual shift mode.
1. Enter the [Shift timing] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Shift timing],
then press Assist-A.
2. Press Assist-X or Assist-Y to adjust the values.
• Pressing Assist-X to increase the value adjusts shift
timing to make pedaling easier.
• Pressing Assist-Y to decrease the value adjusts shift
timing to make pedaling harder.
Assist
3. Press Assist-A to confirm the setting.
* The screen will automatically return to the setting
menu screen.
Assist