Shinco YPL3-10C

Incorrect mounting
Preventing any bends of the exhaust pipe is very important.
Incorrect mounting can prevent the machine from
working correctly.
Take care to prevent any sharp bows or bends of the
exhaust pipe.
The exhaust air must flow freely。
WARNING
The length of the exhaust pipe is specially designed according to the specification of this
product. Do not replace or extend it with your own private hose as this could cause
mal-function.
BE CAREFUL:
Maximum length of the exhaust pipe is 59 inch. Use the
shortest possible length. When mounting, we advise to keep the exhaust pipe in a
horizontal position.
PART NAME
Front
1. Control panel
2. Display
3. Button control
4. Remote control receiver
5. Air outlet vent
6. Louver
7. Castor
8. Remote Control
9
2
3
1
4
5
6
8
7
5