Need help?Do you have a question about the Shini SAL-10HP-UG and is the answer not in the manual?
General| Model | SAL-10HP-UG |
|---|---|
| Category | Industrial Equipment |
| Power | 7.5 kW |
| Voltage | 380V |
| Frequency | 50/60Hz |
| Phase | 3 |
| Speed | 2900 RPM |
| Insulation Class | F |
| Protection Class | IP54 |
| Efficiency | IE2 |
| Motor Power | 7.5 kW |
| Altitude | 1000 m |
Outlines crucial safety rules to prevent machine damage and personal injuries during operation.
Details the operational flow and component interactions within the vacuum loading system.
Guides users through the physical setup and connection of the hopper loader to a dryer.
Specifies the necessary electrical power specifications and crucial connection safety notes.
Identifies and explains the functions of each key on the machine's operation panel.
Provides step-by-step instructions for accessing and modifying machine operational parameters.
Outlines the sequence of operations for various functions and cycles of the loader.
Discusses reasons for motor failure after material discharge and their fixes.
Covers problems with partial material loading or frequent shortage alarms.
To Next Page
