15(83)
1.4 Safety Regulations
Note!
Electrical installation of the machine should be done by qualified
electricians.
Before connect through power supply, make sure that power switch
specifications and security ratings are suitable and reliable, and also the main
switch is turned to OFF. Turn off main switch and auto-start switch before
service and maintenance.
1.4.1 Safety Signs and Labels
Danger!
High voltage danger!
This label is stuck on the electrical boxes.
Attention!
This label means that this area should be taken care!
Warning!
High temperature, take care of hands!
This label should be stick to the shell of heater.
Attention!
No need for regular inspection because all the electrical parts in the
control unit are fixed tightly!
Picture 1-2：Safety Signs and Labels
To Next Page
Loading...
Need help?
General
