68(83)
2) PV displays "0-ON" to stand for drying periods. "0-OFF" stands for machine
stop time. Press key to add or decrease time value of "SV/setup
value". Each press of can add or decrease 15 mins set time.
3) Press "ENTER" to confirm the input time value and enter into "0-OFF" time
setup items, then repeat step 2.
Picture 4-3：Intermittent running setup 2
Note：If set 0-ON as 04:00, 0-OFF as 05:00, which means drying periods is 4
hours stop time is 5 hours，then working for 4 hours and being stopped
for 5 hours and repeat this so long.
4) Cancel intermittent running by entering 00.00 at "0-ON" or "0-OFF" press
"ENTER" to confirm input value after time setup and enter into time setup
items from "1-ON" "week-ON".
Picture 4-4：Intermittent running setup 3
4.6 Weekly Time Start Setup
1) Press key to add or decrease the time value in "SV/setup value " from
"1-ON". Press "ENTER" to confirm the input value and comes into the time
setup items of "1-OFF" "MON-OFF".
To Next Page
Loading...
Need help?
General
