Shire Command post - Before You Start; Pre-Assembly Checklist; Tools and Equipment

In more detail…..
GB
IE
Before you start
Things to check before you start
Check all parts as listed in the parts lists
Read the instructions fully before starting work
Follow all the health and safety guidelines
Ensure your base is ready– See page 3
You will need
Hammer
Spirit level
Ladder

1mm,3mm 5mm
 & 8mm drill bit
Drill
Tape measure & Ruler
Sand paper
Gloves
Saw
Pencil
Goggles

A helper for some
tasks
 Screwdriver
 Safety knife
When you see the drill icon
Only ever drill through the first
piece of framework which will be a
pilot hole for the screw to attach the
second piece of framework
The required drill bit size is
shown with the icon.
6mm
14