shokz OPENCOMM2 - Turn Multipoint Pairing on

TURN MULTIPOINT PAIRING ON
18
Turn MultiPoint Pairing On
1. Start with your headset powered off.
2. Press and hold Volume+ until Audrey will say “Pairing” and the LED indicator
flashes red and blue alternately.
3. Press and hold the multifunction button and Volume+ button until Audrey
will say "MultiPoint enabled."
4. Open first device's Bluetooth® menu and select "OpenComm2 by
Shokz_II"Audrey will say "Connected".
5. Turn your headset off.
6. Re-enter pairing mode by pressing and holding Volume+ until
Audrey says “Pairing”and the LED indicator flashes red and blue
alternately.
7. Open second device's Bluetooth® menu and select "OpenComm2 by
Shokz_II"Audrey will say "Connected."
8. Turn your headset off.
9. Turn your headset on. Your headset is now connected to both devices.
LED Indicator
Power/Volume+ Button
Volume- Button