This document describes the ShoreStation® Aluminum Boat Lift, a device designed for lifting boats out of the water, ensuring dependable service for years. The manual provides detailed instructions for assembly, operation, and maintenance, covering various models including SSV30108EDS, SSV30108EDSDW, SSPV30108EDS, and SSPV30108EDSDW.
Function Description:
The ShoreStation Aluminum Boat Lift is a mechanical system designed to raise and lower a boat, protecting it from water exposure and environmental elements when not in use. It utilizes a cradle system that supports the boat's hull, and a winch mechanism, which can be manually or electrically operated, to control the vertical movement of the cradle. The lift is supported by adjustable legs, allowing it to adapt to varying water depths and shoreline conditions. The system incorporates a series of cables and pulleys to distribute the load evenly and ensure smooth operation. Specific models are tailored for standard boats (SSV series) and pontoon boats (SSPV series), with "DW" variants indicating deep water capabilities.
Important Technical Specifications:
The boat lift is rated for a 3000# (3000 pounds) capacity and features a 108-inch width, accommodating a wide range of boats. It is constructed with an aluminum cradle and stainless steel fasteners, emphasizing durability and corrosion resistance in marine environments.
Key components and their specifications include:
- Lower Frame Bundle (V30/40108): The foundational structure of the lift.
- Leg Bundle (V30/40/108/120 SS): Stainless steel legs, adjustable for various water depths. Deep water (DW) versions are available, such as the ADJ LEG DW 3.125 X 72.
- Winch Tube Bundle (V30/40 SS): Houses the winch mechanism.
- Platform Bundle (Alum V30/40108SS): The aluminum platform that supports the boat cradle.
- Winch Assembly (EDCS 1500/3000 Hoist): The core lifting mechanism, capable of handling 1500 to 3000 pounds. It includes a small cable drum, reduction gear drive shaft, input drive shaft/sprocket, and a direct drive chain.
- Bunk Poly (V30/40 Alum Lift SS): Polyethylene bunks designed to support the boat's hull without scratching. Pontoon kits (V Alum Cradle Lift) are available for SSPV models.
- Motor Stop Bundle (5.75 Alum V): A safety feature to prevent over-lifting.
- Battery Box & Brkt Mec Winch Tube: For models with electric winches, providing protection for the battery.
- Fasteners: Stainless steel fasteners are used throughout the assembly, requiring anti-seize application during assembly to prevent galling or seizing.
- Cables: Lift cables are galvanized (GALV 26 and 36 series) and winch cables are specified for V20 30 40 hoists.
- Pulleys: 5-inch pulleys with bearings are used in the cable system.
- Bushings: Stainless steel and Nylatron V-hoist bushings are utilized for smooth operation and reduced wear.
- Adjustable Legs: Guide posts and adjustable legs allow for precise leveling and height adjustment.
- Upper Limit Switch: A safety feature to prevent the lift from raising too high.
Usage Features:
The ShoreStation boat lift is designed for ease of use and adaptability.
- Adjustable Legs: The adjustable legs allow the lift to be set up in varying water depths, ensuring the boat can be fully submerged for launching and adequately raised for storage. Decals with adjustment gauges (30 X 1/4) assist in precise leveling.
- Pontoon Kit: For pontoon boats, a specific pontoon kit (V Alum Cradle Lift) is available, ensuring proper support and stability for these types of vessels.
- Motor Stop: The motor stop feature prevents the boat from being lifted too high, protecting both the boat and the lift mechanism from damage.
- Winch System: The winch system, whether manual or electric, provides controlled lifting and lowering of the boat. The manual highlights the importance of proper cable connections for level operation.
- Bunk Design: The polyethylene bunks (Bunk Poly V30/40 Alum Lift SS) are designed to provide gentle support for the boat's hull, preventing scratches and damage. Quick-adjust bunk brackets facilitate easy positioning.
- Cable Leveling: The manual emphasizes the importance of level cable connections for optimal performance and safety.
Maintenance Features:
The design and materials of the ShoreStation boat lift contribute to its low maintenance requirements and long service life.
- Stainless Steel Fasteners: The use of stainless steel fasteners is a critical maintenance feature, as it provides excellent corrosion resistance in freshwater and saltwater environments. However, the manual explicitly states the need to "ALWAYS apply anti-seize to fastener threads before assembly to prevent galling or seizing." This is a crucial step to ensure fasteners can be removed for future maintenance or disassembly.
- Aluminum Construction: The aluminum frame and cradle are lightweight and inherently corrosion-resistant, reducing the need for frequent painting or rust treatment.
- Durable Components: Components like Nylatron V-hoist bushings and polyethylene bunks are chosen for their durability and resistance to wear and tear, minimizing the need for frequent replacement.
- Detailed Manual: The comprehensive manual includes "Installation, Transporting, Operation, Safety, Maintenance, and additional accessories" information, empowering users to perform routine checks and basic maintenance.
- Replacement Parts: The manual includes detailed drawings and Bill of Materials (BOM) with part numbers, making it easy to identify and order replacement parts if needed. This ensures the longevity of the lift by allowing for component-level repairs.
- Regular Inspections: While not explicitly detailed in this excerpt, the mention of a "SHORESTATION Operators Manual" suggests that regular inspections and preventive maintenance schedules are provided to ensure continued dependable service. This would typically include checking cable condition, fastener tightness, and overall structural integrity.
To Next Page
Need help?
General
