ADM-870 05/23/0849
REPLACEMENT PARTS LIST
Part no No reqd per set Description
ADM-870M 1 AirData Multimeter
PS8201 1 Battery charger
AA-NICAD 12 Rechargeable Ni-Cd batteries
ADT442 1 TemProbe temperature probe - 4" x 1/8" diameter
TRC16 1 Temperature retractile cord - 1'x 6'
TEW19 1 Temperature extension wand 19"
A-303 2 Static pressure tip
160-18 1 Pitot tube - 18" length
NT316 1 3/16" ID Neoprene tubing, two 5' lengths
AFP18 1 AirFoil probe, 18" length (24", 36" or 48" available)
VLG84 1 VelGrid with three 18" extension rods, pushbutton
handle, bracket & 8' tubing harness
MC84 1 Fitted foam-lined carrying case
IM-870 1 Instruction manual - ADM-870
8400 FLOWHOOD
844 1 FlowHood base assembly with flaps
845 1 Flow sensing grid
826 1 Top support assembly
842 1 Pushbutton handle assembly
827 4 Support dowels
838 2 Frame storage bridge
829 1 Carrying case
2' x 2' TOP (61 x 61 cm)
220 4 Side channel (type 7)
2x2F 1 Complete frame assembly (all of above)
2x2S 1 Cloth skirt (24" x 24")
2x2T 1 2x2 top set complete
1' x 4' TOP (33 x 119.4 cm)
141 2 Side channel (type 1)
142 2 Side channel (type 2)
143 2 End channel (type 3)
1x4F 1 Complete frame assembly (all of above)
1x4S 1 Cloth skirt (13" x 47")
1x4T 1 1x4 top set complete
2' x 4' TOP (63.5 x 119.4 cm)
141 2 Side channel (type 1)
142 2 Side channel (type 2)
244 2 End channel (type 4)
2x4F 1 Complete frame assembly (all of above)
2x4S 1 Cloth skirt (25" x 47")
2x4T 1 2x4 top set complete