To Next PageTo Next Page
Need help?Do you have a question about the Shortridge Instruments AIRDATA ADM-880C and is the answer not in the manual?
General| Accuracy (Humidity) | ±2% RH |
|---|---|
| Display | LCD |
| Connectivity | USB |
| Measurement Parameters | Air Velocity, Temperature, Humidity |
| Resolution | 0.1% RH |
| Accuracy (Temperature) | ±0.5 °F |
| Power Supply | 4 AA batteries |
| Data Logging | Yes |
| Weight | 1.2 lbs |
Details the arrangement and primary functions of the eight keys on the ADM-880C keypad.
Describes the location and function of external connectors and ports on the meter's sides and back.
Lists and explains the ten prompts displayed by the meter to initiate measurements.
Explains the format and meaning of displayed measurement results, including units.
Detailed explanation of primary, secondary, and tertiary functions of each key and their access methods.
Describes the ALT key's roles as an alternate function key, escape key, and for viewing settings.
Explains how to turn the meter on/off and control the display backlight.
Details how to scroll through memory in descending order and use the 'Go To' function.
Explains scrolling memory ascending and resetting the display for long readings.
Describes how to take manual, automatic, and trend readings, and select options.
Covers selecting store modes (All, Last, Off), clearing memory, and changing memory groups.
Details how to view group statistics, associated data, and download readings to a printer.
Explains selecting measurement modes, timed reading setup, and configuration settings.
Instructions for downloading stored data to a computer using the ADM DataFlow software.
Information on checking battery status, understanding battery life, and charging.
Procedure for resetting the meter in case of unresponsiveness, and its effect on memory.
Explains the use of Kv factors for correcting velocity readings from different instruments.
Detailed procedure for measuring air velocity in ductwork using a pitot tube.
Guidance on using the AirFoil probe for velocity measurements, including specific applications.
Instructions for using the VelGrid for face velocity measurements on filters and grilles.
Compares local density true air velocity with standard density mass flow velocity.
Procedures for measuring differential pressure using various probes and connections.
Explanation of how to measure absolute pressure and its use in density correction.
Instructions for connecting and using the TemProbe for temperature measurements.
Overview of the FlowHood kit for backpressure compensated air flow measurements.
Explains the process of measuring air flow with backpressure compensation.
Guidance on unpacking the FlowHood kit and assembling the various frame sizes.
Procedure for measuring air flow without compensating for FlowHood induced backpressure.
Procedure for measuring air flow with automatic backpressure compensation.
Guidance on identifying and resolving issues when measured air delivery is less than expected.
Explains how the meter automatically corrects for barometric pressure density effects.
Details temperature density correction for air flow/velocity readings using the TemProbe.
Procedure for checking the meter's zero accuracy in flow or velocity modes.
How to check the zero and accuracy of differential pressure measurements.
Procedure for confirming the accuracy of the absolute pressure function.
Methods for verifying air flow accuracy by comparing with pitot tube traverses.
