ADM-880C 07/20/09iii
13.2 TEMPERATURE DENSITY CORRECTION 53
13.3 RELATIVE HUMIDITY CORRECTION 53
13.4 HOT WIRE ANEMOMETER VERSUS AIRDATA MULTIMETER 53
14.0 METER ACCURACY FIELD TESTING 55
14.1 METER ZERO FUNCTION 55
14.2 DIFFERENTIAL PRESSURE FUNCTION 55
14.3 ABSOLUTE PRESSURE FUNCTION 55
14.4 AIR FLOW ACCURACY 55
14.5 DUCT TRAVERSE COMPARISON, INCLINED MANOMETER OR MICROMANOMETER 56
14.6 DUCT TRAVERSE USING THE AIRDATA MULTIMETER 56
14.7 BACKPRESSURE COMPENSATED COMPARISON READING 56
14.8 NONBACKPRESSURE COMPENSATED READING 56
15.0 METER MAINTENANCE 57
16.0 FLOWHOOD MAINTENANCE 57
17.0 RECALIBRATION AND REPAIR INFORMATION 58
AIR BALANCE MANUALS & TRAINING PROGRAMS 58
WARRANTY 59
APPENDIX A - NIST VELOCITY TESTING 60
APPENDIX B - LABORATORY DIFFERENTIAL PRESSURE TEST 61
APPENDIX C - BATTERY TEST PROCEDURE 62
REPLACEMENT PARTS LIST 64
INDEX 66
Copyright © Shortridge Instruments, Inc., 2009. All rights reserved. This information may not be reproduced or duplicated in
any manner, or for any purpose, without permission in writing from Shortridge Instruments, Inc. Addendums or revisions
made to this manual after July 2009 may be found at www.shortridge.com.
To Next Page
Loading...
Need help?
General
