Need help?Do you have a question about the Showlight DESK 192B MINI and is the answer not in the manual?
General| Brand | Showlight |
|---|---|
| Model | DESK 192B MINI |
| Category | Controller |
| Language | English |
Lists items included with the DMX controller.
Steps for safely unpacking the DMX controller and checking contents.
Crucial safety precautions for operating the DMX controller to prevent damage or injury.
Highlights the key capabilities and specifications of the DMX controller.
Provides a high-level description of the DMX controller's functionality and applications.
Details the front panel layout, buttons, and indicators of the DMX controller.
Defines essential terminology used in intelligent light programming and DMX control.
Procedures for initial setup, including system connection and fixture addressing.
Guides users on assigning DMX addresses to fixtures for proper control.
Explains how to configure fade time for channel changes, distinguishing movement from other attributes.
Allows direct control of fixture attributes using channel faders.
How to view stored scenes and chases on the controller.
Guides on creating and managing scenes, programs, and chases.
Steps to activate the controller's programming functions.
Detailed procedure for capturing and storing a static lighting state.
How to execute stored programs and adjust their speed and loop rate.
Method for reviewing previously created programs.
Instructions for modifying existing programs by adjusting fixture parameters.
How to duplicate existing programs to new banks for easier management.
Steps to create and manage chases by sequencing scenes.
Procedure for building a chase by adding scenes as steps.
How to play back programmed chases and control their speed.
How to review the steps and scenes within a programmed chase.
Copying an entire bank of scenes into a chase.
Copying a specific scene into a chase.
Inserting a scene at a specific step within an existing chase.
Removing a specific scene from a chase sequence.
How to remove an entire chase program from memory.
Procedure to erase all programmed chases from the controller.
Methods for managing individual scenes within chases and banks.
Adding a scene as a step into a chase at a specified position.
Duplicating a scene from one bank to another.
Removing a scene from its bank, setting its channels to zero.
Erasing all programmed scenes from the controller's memory.
Instructions for running programmed scenes and chases in various modes.
How to execute programs triggered by sound via the built-in microphone.
How to run programmed banks or chases automatically.
Action to immediately turn off all lights temporarily.
Introduction to DMX-512 protocol, channel assignment, and daisy-chaining.
Explains how to connect DMX fixtures using XLR connectors and the need for termination.
A chart correlating DMX DIP switch settings to DMX starting addresses.
Details the controller's power supply, operating temperature, outputs, and weight.
To Next Page
