Need help?Do you have a question about the SHOWTEC Phantom 12R Hybrid and is the answer not in the manual?
General| Brand | SHOWTEC |
|---|---|
| Model | Phantom 12R Hybrid |
| Category | Lighting Equipment |
| Language | English |
Important safety and general information before operating the device.
Specifies the professional application and limitations of the moving head.
Advice on extending the device's lifespan by proper usage.
Explains formatting used in the manual for buttons, references, and notes.
Defines hazard symbols (Danger, Warning, Caution) and their meanings.
Describes symbols found on the device's information label.
Crucial safety guidelines covering electrical hazards, hot surfaces, and movement.
Outlines user qualifications and responsibilities for installation and maintenance.
Identifies components visible from the front of the moving head.
Identifies connectors and components located on the back of the device.
Details mounting points and features on the device's base.
Lists technical details like electrical, physical, movement, and optical properties.
Information on available accessories that can be purchased separately.
Provides the physical dimensions of the moving head fixture.
Critical warnings regarding safe installation practices to prevent injury or damage.
Specifies the need for PPE during installation and rigging.
Defines environmental and location conditions for safe installation.
Details procedures and safety measures for mounting the device.
Instructions for safely connecting the device to the electrical power source.
Guidelines for connecting multiple units to a single power circuit safely.
General warnings and precautions before performing setup procedures.
Instructions for operating the device without external control.
Explains how to connect the device for DMX control.
Details the DMX-512 standard and connection limitations.
Specifies the type of cables required for DMX connection.
Procedures for configuring devices in a master/slave control configuration.
How to chain multiple devices together for DMX control.
Instructions for setting the unique DMX address for each device.
Safety guidelines specific to operating the moving head.
Overview of available operational modes: Stand-alone, Master/Slave, DMX-512.
Description of the device's control panel buttons and display.
Information on what happens when the device is powered on.
Visual guide to navigating the device's menu structure.
Details the primary menu categories for device configuration.
How to set the DMX address via the device menu.
Explains how to use the device's internal auto and sound-controlled programs.
Configuration options for advanced features like pan/tilt reverse and lamp settings.
Accessing details about the device's software version and operating status.
Detailed breakdown of DMX channel assignments for controlling functions.
Information on the device's gobo and color wheel features.
Information about the device's light source and its proper handling.
Solutions for when the device does not receive power or turn on.
Troubleshooting steps for complete device failure.
Addressing unpredictable behavior or incorrect operation.
Steps to resolve issues with DMX signal reception or control.
Troubleshooting for inconsistent DMX control responses.
Solutions for problems related to the light output or lamp operation.
Essential safety precautions before performing maintenance tasks.
Routine checks and cleaning to ensure optimal performance.
Step-by-step guide for cleaning the device's external parts.
Procedures for fixing common issues like blown fuses or lamp replacement.
Detailed instructions for safely replacing a blown fuse.
Step-by-step guide for safely replacing the discharge lamp.
How to adjust the lamp position for optimal beam projection.
Safety guidelines and procedures for safely removing the device.
Best practices for transporting the device safely.
Recommendations for storing the device properly.
To Next Page
