Showven uFetti Blower - DMX Control

Press “MENU” enter menu interface, press “LEFT”, “RIGHT” enter different items, press “BACK” switch
back to main interface.
Menu
Explanation
MAIN
Main menu
ADVANCED
Advanced menu
FACTORY
Factory menu (password is required to enter)
BACK
Back to main interface
LEFT
Left item
RIGHT
Right item
EDIT
Select
6. Main Menu
Select “MAIN” in menu interface, press “EDIT” to enter main menu.
BACK: Back to previous interface
UP: up or +
DOWN: down or –
EDIT: Edit selected items
SAVE: Save
Items
Contents
Default
Description
Set DMX Address
1-512
1
Device DMX address
Set Safety Addr
1-512
3
Safety DMX address
Output Mode
High_Power/
Low_Power
High_Power
Blower output mode
Duration (s)
10-600
600
Firing duration when manual firing
Interval (s)
0-600
0
Firing interval when manual firing
Hopper Roll Speed1
1-100
100
Hopper 1 roll speed when manual firing
Hopper Roll Speed2
1-100
100
Hopper 2 roll speed when manual firing
7. Advanced Interface
Select “ADVANCED” in menu interface, press “EDIT” to enter advanced menu.
Items
Contents
Default
Description
Mode Selection
User Mode
/Factory Mode
User Mode
Factory mode is for manufacturer use only
ARM State
ON/OFF
ON
ARM indicator light ON/OFF setting
LCD Backlight
ON/OFF
ON
ON: LCD backlight long on
OFF: LCD backlight off in 30s if no operation
Key Sound
ON/OFF
ON
Keypad sound ON/OFF setting
DMX Lock
ON/OFF
OFF
ON: Keypad function disabled when there is DMX
signal in
Motor Protect
ON/OFF
ON
ON: Turn on the error message prompt function of
the motor (feeding motor and blower motor).
DefaultParameter
ON/OFF
OFF
Reset default parameter settings
Δ DMX CONTROL
uFetti Blower occupies 2 functional channel CH1, CH2 and 1 separate safety channel CH-S (this channel is
independent from functional channels, can be shared with other machine).