20
Thorough clean can extend the lifetime of this unit. Clean the dust regularly, especially the dust
accumulating beside the treadmill belt to avoid the accumulation below the belt.
Make sure the neat of the shoes to avoid the foreign objects carried by shoes abrading
treadmill board and bolt.
The surface of treadmill bolt must be cleaned by wet cloth spread with soap. Please note
that avoid water splashing on the electric parts and the bolt.
Warning: Remove the plug from the power supply of the treadmill before moving the motor cover.
Open the motor protective cover at least once a year to clean the motor.
We suggest the owner to lubricate the Treadmill according to below.
Exercising Frequency Lubricating Schedule
Inactive User (less 3 hours every week) once every year
Active User (3-5 hours every week) once every 6 months
Super Active User (exceed to 5 hours every week) once 3 months
We suggest that you should purchase lubricates silicon oil from local dealer or contact our company
directly.
Method to add the silicon oil
1. Lift up the right side of running belt with one hand and pull to the left.
2. Open the cover of the orifice.
3. Put some lubricating oil into the orifice.
To Next Page
Loading...
