22
A B
V-Belt Adjusting:
After a long time exercise, the multi-wedge belt was worn or became loose. In this case, you must
do an appropriate adjustment for the safety. The way of judgment is: during your normal running
exercise, when your foot step on the running belt and feel that the running belt has the
phenomenon of occasional stop that indicates the running belt or multi-wedge belt is somewhat
loose, the further confirmation should be done. The way to judge which kinds of components are
loose: taking apart the six screws on the protection cover above the belt, let the treadmill run in a
speed of 1KM/H, then stand on the running belt, grasp the armrest with two feet. (We suggest
step and press the running belt by the runner’s weight).
✓ If the instantaneous stepping strength cannot stop the running of the running belt that indicates the
tightness of multi-wedge belt and running belt are appropriate.
✓ If you feel that the instantaneous stepping strength make the treadmill stop, but the multi-wedge and
the front roller still running that indicates the running belt be in some loose, then the appropriate
adjustment should be done for the safety usage. (About the adjustment of running belt, please refer to
maintenance guide).
✓ If you feel that the instantaneous stepping strength make the running belt and multi-wedge belt is loose,
the appropriate adjustment should be done for the safety usage.
。
Adjusting Method:
Step 1:
Remove the six screws of the treadmill front shield cover, thus relieved of the shield cover.
To Next Page
Loading...
