selecting a battery type is not necessary and the battery type will
display Shure.
1. Navigate to the Utilities and select Battery.
2. Use the ▼ buttons to select the installed battery
type:
Alkaline = Alkaline
NiMH = Nickel Metal Hydride
Lithium = Lithium Primary
3. Press enter to save.
Updating Firmware
Firmware is embedded software in each component that
controls functionality. Periodically, new versions of
firmware are developed to incorporate additional features
and enhancements. To take advantage of design
improvements, new versions of the firmware can be
uploaded and installed using the Shure Update Utility.
The Shure Update Utility is available for download from
http://www.shure.com/.
Firmware Versioning
When performing an update, download firmware to the
receiver first, and then update transmitters to the same
firmware version to ensure consistent operation.
The firmware numbering for Shure devices uses the
following format: MAJOR.MINOR.PATCH (e.g., 1.2.14). At
a minimum, all devices on the network (including
To Next Page
Loading...
