Need help?Do you have a question about the Shure AD1 and is the answer not in the manual?
General| Input Connector | TA4M |
|---|---|
| Form Factor | Bodypack |
| THD | <0.1% |
| RF Output Power | 10 mW, 2 mW |
| Battery Type | Shure SB900A rechargeable battery or AA batteries |
| Input Impedance | 1 MΩ |
| Audio Frequency Response | 20 Hz to 20 kHz |
| Battery Life | Up to 9 hours with Shure SB900A rechargeable battery |
| Modulation Type | Proprietary Shure digital |
| Dynamic Range | 120 dB, A-weighted |
Details the performance and design aspects of the AD1 Axient Digital Bodypack Transmitter.
Guide to configuring the transmitter for the correct AA battery type for accurate runtime display.
Explains how to view detailed battery status information like charge, health, and cycle count.
Step-by-step instructions for downloading and installing new firmware onto the transmitter.
Technical details including mic offset range, battery type, runtime, dimensions, weight, and operating temperature.
Table listing available frequency bands, their ranges, and corresponding transmitter RF power levels.
To Next Page
