Shure AD1 - Battery Installation; Setting the AA Battery Type; AA Battery Installation

Shure Incorporated
8/24
•
•
1.
2.
◦
◦
◦
3.
Battery Installation
① Accessing the Battery
Compartment
Press the side tabs on the bodypack and open the battery door as shown to access the bat
tery compartment.
② Installing Batteries
AA Batteries: Place batteries (note polarity markings) and AA Adaptor as shown and
close the door
Shure SB900A Battery: Place battery as shown (note polarity markings). Remove the
AA adapter and set it aside. Close the door to secure the battery.
Note: If using AA batteries, set the battery type using the transmitter menu.
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in the transmitter menu to match the installed AA battery
type.
Note: If a Shure SB900A rechargeable battery is installed, selecting a battery type is not necessary and the battery type will display Shure.
Navigate to the Utilities and select Battery.
Use the ▼▲ buttons to select the installed battery type:
Alkaline = Alkaline
NiMH = Nickel Metal Hydride
Lithium = Lithium Primary
Press enter to save.
AA Battery Installation
Fully insert the batteries as shown to ensure proper battery contact and to allow the door to latch securely.