Shure AD2 User Manual

9/8/17, 2)16 PMShure Publications | User Guides | AD2
Page 1 of 32http://pubs.shure.com/guide/AD2/en-US
AD2
Handheld Transmitter
WARNING
Battery packs may explode or release toxic materials.
Risk of fire or burns. Do not open, crush, modify,
disassemble, heat above 140°F (60°C), or incinerate.
Follow instructions from manufacturer
Only use Shure charger to recharge Shure
rechargeable batteries
WARNING: Danger of explosion if battery incorrectly
replaced. Replace only with same or equivalent type.
Never put batteries in mouth. If swallowed, contact
your physician or local poison control center
Do not short circuit; may cause burns or catch fire
Do not charge or use battery packs other than Shure
rechargeable batteries
Dispose of battery packs properly. Check with local
vendor for proper disposal of used battery packs.
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire
or the like
Note: Use only with the included power supply or a Shure-
approved equivalent.
WARNING: Danger of explosion if incorrect battery
replaced. Operate only with AA batteries.
Please follow your regional recycling scheme for batteries,

Publications User Guides AD2 (English)
Search Publications

› ›

Download PDF

English

Table of Contents
WARNING
AD2 Handheld Transmitter
Features
Included Components
Optional Accessories
Transmitters
Transmitter Controls
Home Screen Display
Locking the Controls
Battery Installation
Updating Firmware
Shure SB900A Rechargeable
Battery
Menu Parameters
IR Sync
Setting the Frequency
Manually

Shure AD2 Specifications

General

Modulation Type	Digital
Encryption	AES 256-bit
Input Impedance	1 MΩ
RF Output Power	10 mW, 2 mW
Dimensions	256 mm x 51 mm (10.1 in. x 2.0 in.)
Weight	340 g (12.0 oz), without batteries
Spurious Rejection	Typically > 80 dB
Battery Type	Shure SB900A Rechargeable Battery or AA Batteries
Housing	Aluminum
Frequency Range	470–636 MHz, 606–810 MHz, 806–810 MHz, 925–937.5 MHz, 1492–1525 MHz
Type	Handheld

Summary

WARNING

Battery Safety Precautions

Crucial safety guidelines for handling, charging, and disposing of transmitter batteries to prevent hazards.

Product Features and Specifications

Performance and Design

Details on audio quality, RF performance, range, modulation, design, and construction.

Included and Optional Components

Lists of items included in the package and optional accessories.

Technical Specifications

Covers offset range, battery type, dimensions, weight, RF output, and frequency bands.

Transmitter Controls and Operation

Components, Display, and Locking

Identification of transmitter parts, screen display, and control locking mechanism.

Battery Installation and Management

Steps for battery installation, SB900A details, AA runtime, and status checking.

Menu Navigation and Settings

Overview of menu structure and how to adjust parameters.

Core Operational Functions

Procedures for IR Sync, frequency setting, RF Mute, tone generator, and offset adjustment.

Firmware and Regulatory Information

Firmware Update Process

Instructions for updating the transmitter's firmware.

Certifications and Licensing

Details on product certifications, licensing requirements, and regional warnings.