function to match the audio levels and eliminate audible
volume differences between transmitters. If using a single
transmitter, set Offset to 0 dB.
1. Turn on the first transmitter and perform a sound
check to test the audio level. Turn off the transmitter
when finished.
2. Turn on the second transmitter and perform a sound
check to test the audio level. Repeat for any
additional transmitters.
3. If there is an audible difference in the sound level
between the transmitters, navigate to the Offset
menu ( Audio > Offset ) in the transmitter to increase
or decrease the Offset in realtime to match the audio
levels.
Specifications
Mic Offset Range
-12 to 21 dB (In 1 dB steps)
Battery Type
Shure SB900A Rechargeable Li-Ion or LR6 AA batteries
1.5 V
To Next Page
Loading...
