range of the transmitter.
RF Output On: RF signal is active
Mute: RF signal is inactive
Audio Menu
Offset Adjust Offset level to balance mic levels
when using two bodypacks for frequency
diversity.
MuteMode When enabled, the power switch is
configured as a mute switch for the audio:
Power switch on: audio signal on
Power switch off: audio signal muted
Tone Transmitter will generate a continuous test
tone. The tone can be set to 400 Hz or
1000 Hz.
Level When enabled, allows for adjustment of
the output level of the test tone.
Utilities Menu
Dev ID Assign a device ID of up to 9 letters or
numbers.
Lock Locks the transmitter controls and power
switch.
Marker When enabled, press the enter button to
drop a marker in Wireless Workbench.
Battery Displays battery information:
Battery: The chemistry type of for the
installed battery (Shure Rechargeable,
Alkaline, Lithium, NiMH)
To Next Page
Loading...
