Shure ANIUSB-Matrix - Page 24

9/12/17, 8)20 AMShure Publications | User Guides | ANIUSB-Matrix
Page 24 of 39http://pubs.shure.com/guide/ANIUSB-Matrix/en-US
{yyyyyyyyyyyyyyyyyyyyyyyyy} >
< REP PRESET2
{yyyyyyyyyyyyyyyyyyyyyyyyy} >
< REP PRESET3
{yyyyyyyyyyyyyyyyyyyyyyyyy} >
etc
always responds with a 25 character device
ID
Get Audio Gain
Command String:
< GET xx AUDIO_GAIN_HI_RES >
Where xx is ASCII channel number: 00
through 10.
ANIUSB Response:
< REP xx AUDIO_GAIN_HI_RES yyyy >
Where yyyy takes on the ASCII values of
0000 to 1400. yyyy is in steps of one-
tenth of a dB.
Set Audio Gain
Command String:
< SET xx AUDIO_GAIN_HI_RES yyyy >
Where yyyy takes on the ASCII values of
0000 to 1400. yyyy is in steps of one-
tenth of a dB.
ANIUSB Response:
< REP xx AUDIO_GAIN_HI_RES yyyy >
Where yyyy takes on the ASCII values of
0000 to 1400.
Increase Audio Gain by n dB
Command String:
< SET xx AUDIO_GAIN_HI_RES INC nn >
Where nn is the amount in one-tenth of a
dB to increase the gain. nn can be single
digit ( n ), double digit ( nn ), triple digit (
nnn ).
ANIUSB Response:
< REP xx AUDIO_GAIN_HI_RES yyyy >
Where yyyy takes on the ASCII values of
0000 to 1400.
Decrease Audio Gain by n dB
Command String:
< SET xx AUDIO_GAIN_HI_RES DEC nn >
Where nn is the amount in one-tenth of a
dB to decrease the gain. nn can be single
digit ( n ), double digit ( nn ), triple digit (
nnn ).
ANIUSB Response:
< REP xx AUDIO_GAIN_HI_RES yyyy >
Where yyyy takes on the ASCII values of
0000 to 1400.
Get Analog Input Gain Switch
Command String:
< GET xx AUDIO_IN_LVL_SWITCH >
Where xx is ASCII channel number: 00 or
05.
ANIUSB Response:
< REP xx AUDIO_IN_LVL_SWITCH
LINE_LVL >
The ANIUSB will respond with one of these
strings.