Shure DCS 6000 User Manual (English)

Other manuals for Shure DCS 6000

Questions and Answers:

A
anthony41Aug 22, 2025
How to troubleshoot no audio in the built-in loudspeakers of my Shure DCS 6000 Conference System?
- M
  Matthew MclaughlinAug 22, 2025
  To resolve this, verify the 'Loudspeaker Volume' setting via the interactive menu on the CU or through the browser control. Also, using the browser control, ensure that the setting 'CU 6110 Setup * Audio * Loudspeaker Control * Microphone -> Loudspeaker' is set to 'On'. Finally, confirm in the browser control settings under 'CU 6110 * Audio * Audio Output * Group Setup' that the seats are selected in 'Group A', as this group serves as the source for the built-in loudspeakers. Units not in 'Group A' will not have their audio heard through the loudspeakers.
Q
qmayerAug 23, 2025
What to do if the CU 6110 browser application won't open on my PC or iPad for Shure Conference System?
- B
  Beth AndersonAug 23, 2025
  To fix the issue, check the IP address using the interactive menu on the CU: ‘LAN setup/IP address setup/IP address’. Use this IP address in the browser. Ensure that the CU 6110 is connected to the same network as the PC. Verify the LAN cables are working properly.
R
Rebecca EllisonAug 25, 2025
Why is there no audio in the built-in loudspeakers from some delegate or chairman units in my Shure DCS 6000 Conference System?
- T
  tamaramackAug 26, 2025
  To solve the problem, check using the browser control in ‘CU 6110 * Audio * Audio Output * Group Setup‘ that this seat is selected in ‘Group A’. 'Group A' is always used as the source for the built-in loudspeakers. If a unit is not selected in ‘Group A’ the audio from this unit will not be heard in the built-in loudspeakers.
A
Ashley ChapmanAug 27, 2025
How to fix CU 6110 browser application not opening on iPad for Shure DCS 6000?
- B
  Brandon WestAug 27, 2025
  To address this, check the IP address using the interactive menu on the CU: ‘LAN setup * IP address setup * IP address’. Use this IP address in the browser. Make sure that the iPad is connected to the correct wireless access point. Ensure that the CU 6110 is connected to the same network as the wireless access point.
S
stevenholdenAug 27, 2025
Why are the light rings constantly flashing on the microphones in my Shure DCS 6000 units?
- B
  Benjamin GarciaAug 28, 2025
  To resolve the flashing light rings, check the cables to ensure digital communication from the central unit to the Conference units is established. Verify that all connectors on all cables are firmly inserted in the DCS-LAN sockets on the units. Also, ensure that the feeding cables from the Conference units are inserted in the ‘DCS-LAN’ chain connectors on the CU 6110.
A
Amanda BeckAug 29, 2025
What to do if the audio from an interpreter unit can't be heard in the headphones of delegate or chairman units in Shure DCS 6000?
- C
  Christine RobertsAug 29, 2025
  To troubleshoot, check the headphone volume control on the units. Ensure the channel selection on the Conference units is correct. Verify the headphone plug is firmly inserted in the headphone socket. Confirm that the light ring on the microphone on the interpreter unit is lit and the gooseneck microphone is firmly inserted in the microphone socket.
T
Terri SullivanAug 30, 2025
Why can't a microphone be turned on in my Shure Conference System?
- C
  crawfordmadisonAug 30, 2025
  To solve this, check the settings ‘Max Delegate Speaker’ and ‘Max Total Speakers’. Also, check the ‘Operation Mode’.
R
Rachel AlvarezAug 31, 2025
What to do if the 'Del. Off' button on the chairman unit doesn't switch off delegate units in Shure DCS 6000?
- B
  Brent HessAug 31, 2025
  To address this, verify if the unit is configured as a chairman unit. Also, check if the units that are not switching off are configured as chairman units, as chairman units are not switched off by the ‘Del. Off’ button.
D
Dorothy SmithSep 2, 2025
Why is there no audio from the loudspeakers on my Shure DCS 6000 Conference System?
- T
  Thomas DixonSep 2, 2025
  If no audio is coming from the built-in loudspeakers of your Shure Conference System, first, check the 'Loudspeaker Volume' setting using either the interactive menu on the CCU or the browser control. Also, verify that the loudspeaker volume is set high enough and that the floor mix is assigned to the loudspeaker. Finally, ensure that the seats are selected in 'Group A'.
M
Mr. Douglas Gonzalez MDSep 3, 2025
How to fix DIS-CCU browser application if it will not open on a PC with Shure Conference System?
- R
  Robert DuranSep 3, 2025
  If the DIS-CCU browser application won't open on your PC, use the interactive menu on the CCU to check the IP address under LAN setup > Acquire IP address, and use this IP address in your browser. Verify that the CCU and the PC are connected to the same network, and check the LAN cable connections.

Shure DCS 6000 Specifications

General

System Type	Digital Conference System
Microphone Type	Gooseneck microphone
Connectivity	RJ-45 Ethernet
Power Supply	PoE (Power over Ethernet)
Features	Voting, Interpretation
Connector Type	XLR and RJ-45
Color	Black