A
Andrea BlevinsJul 26, 2025
How to troubleshoot no sound at the Shure Microphone system receiver?
- JJohn Lin DDSJul 26, 2025
If you're not getting any sound at the receiver of your Shure Microphone system, first, check the power cord on the TransMixer and ensure it's powered on. Next, verify that both the TransMixer and the P2R Receiver are set to the same frequency channel. Also, ensure that your earphones are properly plugged into the receiver and the volume is turned up. Confirm that the receiver is on and the battery is in good condition. Finally, check the incoming audio connections on the TransMixer.