22
Do Not Duplicate or Redistribute
QLXD1
Mic Offset Range
0 to 21 dB (in 3 dB steps)
Battery Type
Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V
Battery Runtime
Shure SB900
>10 hours
alkaline
up to 9 hours
See Battery Runtime Chart
Dimensions
86 mm x 66 mm x 23 mm (3.4 in. x 2.6 in. x 0.9 in.) H x W x D
Weight
142 g (5.0 oz.), without batteries
Housing
Cast aluminum
Audio Input
Connector
4-Pin male mini connector (TA4M), See drawing for details
Configuration
Unbalanced
Impedance
1 MΩ, See drawing for details
Maximum Input Level
1 kHz at 1% THD
Preamplifier Equivalent Input Noise (EIN)
System Gain Setting ≥ +20
-120 dBV, A-weighted, typical
RF Output
Connector
SMA
Antenna Type
1/4 wave
Impedance
50 Ω
Occupied Bandwidth
<200 kHz
Modulation Type
Shure proprietary digital
Power
1 mW or 10 mW
QLXD2
Mic Offset Range
0 to 21 dB (in 3 dB steps)
Battery Type
Shure SB900 Rechargeable Li-Ion or AA batteries 1.5 V
Battery Runtime
Shure SB900
>10 hours
alkaline
up to 9 hours hours
See Battery Runtime Chart
Dimensions
256 mm x 51 mm (10.1 in. x 2.0 in.) L x Dia.
Weight
340 g (12.0 oz.), without batteries
Housing
Machined aluminum
Audio Input
Configuration
Unbalanced
Maximum Input Level
1 kHz at 1% THD
145 dB SPL (SM58), typical
Note: Dependent on microphone type
RF Output
Antenna Type
Integrated Single Band Helical
Occupied Bandwidth
<200 kHz
Modulation Type
Shure proprietary digital
Power
1 mW or 10 mW
Frequency Bands and Transmitter RF Power
Band Frequency Range
(MHz)
RF Power (mW)
G50 470 - 534 1 or 10
G51 470 - 534 1 or 10
G52 479 - 534 1 or 10
H50 534 - 598 1 or 10
H51 534 - 598 1 or 10
H52 534 - 565 1 or 10
H53 534 - 598 1 or 10
J50 572 - 636 1 or 10
J51 572 - 636 1 or 10
JB 806 - 810 1 or 10
K51 606 - 670 1 or 10
Band Frequency Range
(MHz)
RF Power (mW)
K52 606 - 670 1 or 10
L50 632 - 696 1 or 10
L51 632 - 696 1 or 10
L52 632 - 694 1 or 10
L53 632 - 714 1 or 10
P51 710 - 782 1 or 10
P52 710 - 782 1 or 10
Q51 794 - 806 1 or 10
S50 (823 - 832) (863
- 865)
1 or 10
X51 925 -937.5 1 or 10
To Next Page
Loading...
