To Next PageTo Next PageWhat to do if Shure QLX-D receiver display shows FAIL after encryption is disabled?
If the Shure Microphone system receiver display shows FAIL after encryption is disabled, it indicates an encryption key mismatch. To resolve this, perform an IR sync between the receiver and transmitter to clear the error.
How to troubleshoot Shure Microphone system when there is no sound?
If your Shure Microphone system has no sound, ensure both the receiver and transmitter are getting enough power. Check the battery indicators and replace or recharge if needed. Also, verify that all cables and connectors are fully connected and not damaged; replace them if necessary.
What to do if Shure QLX-D has lack of range, unwanted noise bursts, or dropouts?
If you are experiencing a lack of range, unwanted noise bursts, or dropouts with your Shure Microphone system, first measure the transmitter range to ensure you are within the specified limits. Also, check the surrounding area for any sources of interference, or try changing the receiver to a frequency that is clear.
Why Shure QLX-D Microphone system has faint sound or distortion?
If you're experiencing faint sound or distortion with your Shure Microphone system, adjust the system gain on the front of the receiver. Make sure the mic/line switch setting (XLR output only) on the back of the receiver matches the input of your mixing console, amplifier, or processor. Also, check all cables and connectors to ensure they are fully engaged and undamaged; replace if necessary.
Why Shure QLX-D Microphone system group and channel display shows '--'?
If the group and channel display shows "--" on your Shure Microphone system, and you are using Custom Groups, always perform an IR sync from the Custom Groups menu in the receiver. This ensures that the group and channel information is displayed accurately.
What to do if I cannot turn transmitter off on Shure QLX-D?
If you cannot turn off the transmitter, change frequency settings, or program the receiver on your Shure Microphone system, it may be due to interface locks. If a locked control is accessed, the lock icon on the display will flash. Follow the instructions to unlock the receiver or transmitter.
General| Brand | Shure |
|---|---|
| Model | QLX-D |
| Category | Microphone system |
| Language | English |
Information on operating licenses and regulatory compliance for wireless microphone equipment.
Details on FCC compliance and user responsibilities regarding radio frequency emissions.
Identifies the key components included with the QLX-D wireless system.
Connect power supply and antennas to the receiver for initial setup.
Find the optimal available frequency using the receiver's scan function.
Properly insert batteries into the transmitter for operation.
Synchronize transmitter and receiver frequencies using IR sync.
Perform a sound check and adjust receiver gain for optimal audio levels.
Diagrams and descriptions of the receiver's physical controls and connectors.
Explanation of the symbols and indicators on the receiver's LCD screen.
Overview of transmitter display indicators and navigation buttons.
Guide to accessing and using the transmitter's menu options.
Steps to enable AES-256 encryption for secure audio transmission.
Procedure to disable encryption and clear existing encryption keys.
Automatically find best channels and sync transmitter frequency.
Automate frequency assignment for networked receivers.
Manually set receiver and transmitter to the same group and channel.
Manually set receiver and transmitter to a specific frequency.
Instructions for establishing an Ethernet connection to the receiver.
How the receiver obtains an IP address via DHCP.
Guidance on resolving common network connectivity issues.
Setting IP address and subnet mask manually via receiver or WWB6.
Using WWB6 Monitor tab to manage receiver parameters.
Accessing and identifying receivers within the WWB6 inventory.
Ensuring consistent operation by matching firmware versions.
Procedure for updating the receiver's embedded software.
Process for transferring firmware to transmitters via IR sync.
Resolving errors caused by incompatible encryption keys.
Ensuring accurate group/channel display via IR sync.
Addressing signal issues, range, and interference.
Strategies to minimize interference and RF overload.
Guidance on rack mounting the receiver and installing footpads.
Details on the receiver's audio output connections.
A catalog of optional accessories available for the QLX-D system.
Specifies the operational frequency bands of the system.
Details on effective range and frequency tuning increments.
Key audio metrics including frequency response and dynamic range.
Information on battery types, runtime, and power requirements.
Detailed technical specifications for the QLXD1 bodypack transmitter.
Detailed technical specifications for the QLXD2 handheld transmitter.
Table of available frequency bands and transmitter output power.
Compliance statements for FCC, Industry Canada, and European directives.
