Need help?Do you have a question about the Shure QLXD124/85 and is the answer not in the manual?
General| Transmitter Type | Bodypack |
|---|---|
| Dynamic Range | 120 dB |
| Microphone Type | Dynamic |
| Polar Pattern | Cardioid |
| Latency | 2.9 ms |
| System Type | Digital wireless |
| Receiver Type | Diversity receiver |
| Audio Frequency Response | 20 Hz to 20 kHz |
| Operating Range | 100 m |
| Power | 2 AA batteries |
| Modulation | Digital |
| Connector Type | XLR |
| Operating Temperature | -18°C to 57°C |
Essential safety guidelines for operating the wireless system, covering warnings and precautions.
Step-by-step instructions for initial setup, including power, antenna, and transmitter connection.
Details the front and back panel controls, connectors, and indicators of the receiver.
Covers battery installation procedures and information on Shure SB900 rechargeable batteries.
Describes how to manage and monitor the QLX-D system using Shure Wireless Workbench software.
Instructions for downloading and updating firmware for the receiver and transmitters.
Lists and explains various error codes and their corresponding troubleshooting steps.
To Next Page
